Hison


Following are some of the products in the Hison category.
Feel free to contact us if you require further assistance and we will be pleased to render our expertise.


Hison Axial Flow Fans for Marine Applications

Marine Axial Flow FansIntroduction

  • Hison Axial Flow Fans, formerly know as Howden Fans are manufactured to International Quality Standard.
  • Available from sizes 150mm to 2000mm diameter.
  • Incorporate heavy duty marine grade LM-6 or equal cast aluminium impellers with aerofoil blades for better efficiencies and lower sound level.
  • Adjustable blades angles designs to meet varied volume and pressure system requirements featuring the blade shank with tapered conical section. The tapered section fits into a conical slot in the hub, providing a taper lock fit. A bolt is cast into the blade, projecting into the hub and is secured on the inside by lock-washer and nut.
  • Hison Impellers comes in polypropylene and aluminum.

Performance

  • Ranges from 100m3/hr to 250000m3/hr and static pressure up to 125mm.
  • Performance of Hison Fans are tested in accordance to BS 848 Part 1 1980, the latest ISO 5801 First Edition 1997-06-1 and many of Hison Axial Fan models are also tested in accordance to AMCA 210-99 Standard for air performance and licensed to bear the AMCA seal.
  • Sound level data is in accordance with BS 848 – 1985: part 2. and ISO 5136 First Edition 1990-12-15.

Read more

For any enquries? Please Contact us

Hison Axial Flow Fans for Offshore Applications

Offshore Axial Flow FansIntroduction

  • Hison Axial Flow Fans, formerly know as Howden Fans are manufactured to International Quality Standard.
  • Available from sizes 150mm to 2000mm diameter.
  • Incorporate heavy duty marine grade LM-6 or equal cast aluminium impellers with aerofoil blades for better efficiencies and lower sound level.
  • Adjustable blades angles designs to meet varied volume and pressure system requirements featuring the blade shank with tapered conical section. The tapered section fits into a conical slot in the hub, providing a taper lock fit. A bolt is cast into the blade, projecting into the hub and is secured on the inside by lock-washer and nut.
  • Hison Impellers comes in polypropylene and aluminum.

Performance

  • Ranges from 100m3/hr to 250000m3/hr and static pressure up to 125mm.
  • Performance of Hison Fans are tested in accordance to BS 848 Part 1 1980, the latest ISO 5801 First Edition 1997-06-1 and many of Hison Axial Fan models are also tested in accordance to AMCA 210-99 Standard for air performance and licensed to bear the AMCA seal.
  • Sound level data is in accordance with BS 848 – 1985: part 2. and ISO 5136 First Edition 1990-12-15.

Read more

For any enquries? Please Contact us

Hison Axial Flow Fans for Commercial/Industrial

Commercial Axial Flow FansIntroduction

  • Hison Axial Flow Fans, formerly know as Howden Fans are manufactured to International Quality Standard.
  • Available from sizes 150mm to 2000mm diameter.
  • Incorporate heavy duty marine grade LM-6 or equal cast aluminium impellers with aerofoil blades for better efficiencies and lower sound level.
  • Adjustable blades angles designs to meet varied volume and pressure system requirements featuring the blade shank with tapered conical section. The tapered section fits into a conical slot in the hub, providing a taper lock fit. A bolt is cast into the blade, projecting into the hub and is secured on the inside by lock-washer and nut.
  • Hison Impellers comes in polypropylene and aluminum.

Performance

  • Ranges from 100m3/hr to 250000m3/hr and static pressure up to 125mm.
  • Performance of Hison Fans are tested in accordance to BS 848 Part 1 1980, the latest ISO 5801 First Edition 1997-06-1 and many of Hison Axial Fan models are also tested in accordance to AMCA 210-99 Standard for air performance and licensed to bear the AMCA seal.
  • Sound level data is in accordance with BS 848 – 1985: part 2. and ISO 5136 First Edition 1990-12-15.

Read more

For any enquries? Please Contact us

Hison Axial Flow Fans with Spark Resistant Constructions

Spark Resistant Construction FanIntroduction

  • Hison Axial Flow Fans, formerly know as Howden Fans are manufactured to International Quality Standard.
  • Available from sizes 300mm to 2000mm diameter.
  • Incorporate heavy duty marine grade LM-6 or equal cast aluminium impellers with aerofoil blades for better efficiencies and lower sound level.
  • Adjustable blades angles designs to meet varied volume and pressure system requirements featuring the blade shank with tapered conical section. The tapered section fits into a conical slot in the hub, providing a taper lock fit. A bolt is cast into the blade, projecting into the hub and is secured on the inside by lock-washer and nut.
  • Hison Impellers comes in aluminum.

Spark Resistant Constructions

  • baseefa-logoHison Axial Flow Fans with Explosion Proof Motor and Spark Resistant Construction (SRC) features can be built in compliance and bear the BASEFA ‘ATEX’ 0299X and 0300X certification or the Standard Spark Resistant Construction (SRC) which is built in accordance to AMCA Standard 99-0401-80 Type B Spark Resistant Construction.
  • Extended leads extended to outside of casing in accordance to Explosion proof procedure to explosion proof external fan junction box.
  • Anti-Spark Ring on standard fans is available on request.

Read more

For any enquries? Please Contact us

Hison Bifurcated Fans

Bifurcated FansHison Bifurcated Fans, splitway with motor out of air stream are designed to meet difficult operating conditions, like movement of

  • heated and hot air/gas
  • hazardous air
  • kitchen exhaust system
  • corrosive or contaminated properties
  • alternate to flame proof motors

Performance

  • Ranges from 100m3/hr to 250000m3/hr and static pressure up to 125mm.
  • Performance of Hison Fans are tested in accordance to BS 848 Part 1 1980, the latest ISO 5801 First Edition 1997-06-1 and many of Hison Axial Fan models are also tested in accordance to AMCA 210-99 Standard for air performance and licensed to bear the AMCA seal.
  • Sound level data is in accordance with BS 848 – 1985: part 2. and ISO 5136 First Edition 1990-12-15.

Read more

For any enquries? Please Contact us

Hison Mancoolers/Bug Blowers

Mancoolers/Bug BlowersSpecially designed for cooling hot spots, cooling, gas freeing and fume removal applications.

Hison Mancoolers aid in the dissipation of body heat through a higher evaporation rate, helping to prevent heat exhaustion and increase personal safety.

Particularly effective for fast turn around, minimising costly down time or where a clean healthy environment must be maintained for the safety of workers

For any enquries? Please Contact us

Hison Plated Mounted Fans

Plated Mounted FansIntroduction

  • Hison Axial Flow Fans, formerly know as Howden Fans are manufactured to International Quality Standard.
  • Available from sizes 150mm to 1250mm diameter.
  • Incorporate heavy duty marine grade LM-6 or equal cast aluminium impellers with aerofoil blades for better efficiencies and lower sound level.
  • Adjustable blades angles designs to meet varied volume and pressure system requirements featuring the blade shank with tapered conical section. The tapered section fits into a conical slot in the hub, providing a taper lock fit. A bolt is cast into the blade, projecting into the hub and is secured on the inside by lock-washer and nut.
  • Hison Impellers comes in polypropylene and aluminum.

Performance

  • Ranges from 100m3/hr to 250000m3/hr and static pressure up to 125mm.
  • Performance of Hison Fans are tested in accordance to BS 848 Part 1 1980, the latest ISO 5801 First Edition 1997-06-1 and many of Hison Axial Fan models are also tested in accordance to AMCA 210-99 Standard for air performance and licensed to bear the AMCA seal.
  • Sound level data is in accordance with BS 848 – 1985: part 2. and ISO 5136 First Edition 1990-12-15.

Read more

For any enquries? Please Contact us

Hison Belt-Driven Axial Fans

Belt DrivenDesigned for application where motors need to be outside system airstream. Hison belt driven fans are ideal for moisture laden or dust laden or where system exhausts heated air

Performance

  • Ranges from 100m3/hr to 250000m3/hr and static pressure up to 125mm.
  • Performance of Hison Fans are tested in accordance to BS 848 Part 1 1980, the latest ISO 5801 First Edition 1997-06-1 and many of Hison Axial Fan models are also tested in accordance to AMCA 210-99 Standard for air performance and licensed to bear the AMCA seal.
  • Sound level data is in accordance with BS 848 – 1985: part 2. and ISO 5136 First Edition 1990-12-15. Read more
For any enquries? Please Contact us

Mushroom Cowlings

Mushroom CowlingsFeatures

  • Available for sizes 150mm to 2000mm diameter fans.
  • Options for construction materials includes mild steel, stainless steel or aluminum
  • Option to integrate with or without built-in damper
  • Minimum thickness of 3mm

Standard Surface Coating

  • Hot Dipped Galvanised to EN ISO 461:1999 which also comply to ASTM A123, A153 and BS 729.
  • Blasted to SA 2-1/2 and coated with Hi-built epoxy paints for marine environment and most industrial applications.
  • Special painting to user specification is available upon request.
For any enquries? Please Contact us